Blog Books Factory

PDF/X-1a or PDF/X-4: how should you save a book file for print?

Smiling woman holding two large file icons labelled PDF/X-1a and PDF/X-4, comparing PDF standards for print.

At Books Factory, we recommend saving print files to the PDF/X-1a standard. It is a proven solution that reduces the risk of errors when a book is being prepared for production. We also accept PDF/X-4 files, but PDF/X-1a remains our recommended choice.

How do these PDF print standards differ, and how do you export your project correctly? We explain the key points, from colour and transparency settings to checking the finished file.

What is the PDF/X standard and why does it matter in book printing?

PDF/X is a family of standards designed for exchanging files for professional printing. They define how the information needed in production is stored, including colours, fonts and the intended printing conditions.

An ordinary PDF can look fine on screen and still be unsuitable for print. It may contain fonts that are not embedded, incorrectly prepared colours or elements that are difficult to process. The PDF/X standard reduces that risk because it imposes specific technical requirements.

That does not mean, however, that choosing PDF/X alone guarantees a correct design. Even a compliant file may contain low-resolution images, incorrect bleed or text placed too close to the page edge. That is why, in addition to exporting correctly, you need to check the other parameters of your publication.

PDF/X-1a vs PDF/X-4: how do these standards differ?

Both standards are used to prepare production files, but they differ in how certain design elements are stored and processed. The most important differences concern transparency and colour management.

PDF/X-1a: a proven, predictable standard

PDF/X-1a is a mature, widely known standard that has been used in the printing industry for many years. Its advantage is a relatively simple and unambiguous file structure. Many design elements are already processed during export, so the printer receives a document that requires fewer additional operations.

The key features of PDF/X-1a are:

  • colours—the standard allows CMYK, greyscale and spot colours, but no RGB elements may remain (at Books Factory, we convert spot colours to CMYK);
  • transparency—it must not remain live. All transparency has to be flattened when the file is prepared;
  • fonts—they must be embedded in the file or converted to outlines;
  • printing conditions—the file includes information about the intended printing condition, known as the output intent.

Transparency flattening converts elements that use this effect into objects that can be saved correctly without live transparency. This applies, among other things, to semi-transparent areas, some shadows and blending modes.

It is worth distinguishing transparency from other graphic features. A plain colour gradient or a clipping mask is not, in itself, transparency. So they do not need flattening simply because you have used them.

PDF/X-1a is the standard recommended by Books Factory. Its predictability matters especially to authors and publishers who prepare their own files and do not deal with DTP on a daily basis.

PDF/X-4: more information kept in the file

PDF/X-4 allows live transparency to remain in the document. This means it can be processed at the very end, in the prepress system known as the RIP.

This standard also allows broader use of colour management, including ICC-based colour spaces. Like PDF/X-1a, it requires the intended printing condition to be specified (output intent).

PDF/X-4 can be useful for designs with many transparency effects, as it lets you keep them without flattening during export. However, it requires these elements to be handled correctly further down the production process.

This does not mean that PDF/X-4 delivers better print quality. The difference between the standards lies mainly in how data is processed, not in the ability to achieve a better result on paper.

Books Factory accepts both PDF/X-4 and PDF/X-1a. That said, PDF/X-1a is our recommended standard.

What requirements must a print-ready PDF meet at Books Factory?

Choosing a standard is only part of preparing a publication. For a print PDF to be processed correctly, you also need to take care of its technical parameters.

At Books Factory, the following rules apply:

ParameterRequirement
Output standardPDF/X-1a recommended (PDF/X-4 also accepted)
ColourCMYK, Coated FOGRA 39 profile
Black-and-white publicationsGray Gamma 1.8 or Gray Gamma 2.2
Spot coloursPantone and other spot colours converted to CMYK
BleedMinimum 3 mm
Image resolutionMinimum 300 dpi
FontsEmbedded in the PDF or converted to outlines
Black text100% K, with no other colours mixed in
Large solid black areasMaximum C30 M30 Y30 K100
Vector linesMinimum thickness 0.25 pt
White elementsOverprint disabled

Bleed and margins need particular attention. If a photo, illustration or coloured background reaches the edge of the page, extend it at least 3 mm beyond the trim line. This prevents unwanted white strips after the book is trimmed.

Bleed does not, however, protect text from being cut off. Titles, page numbers and other important elements should sit within the safe margin, at least 5 mm from the trim edge. In the book block, you also need to keep text a suitable distance from the spine—at least 10 mm.

Preparing black correctly also matters. Small black text should consist of 100% K only. Using several CMYK components can reduce text sharpness due to slight colour misregistration. Rich black, on the other hand, can be used on larger areas, within the stated ink coverage limit.

Full details can be found in the Books Factory file requirements.

How do you export a PDF for print?

Saving a print file correctly starts before you even run the export. The design should have the final page size, suitable margins, bleed and properly prepared images.

If you use Adobe InDesign, you can export following the steps below.

1. Choose the right PDF standard

In the program menu, select File → Export, then the format Adobe PDF (Print). In the export settings, choose PDF/X-1a.

Do not pick a random preset intended for on-screen documents or small file sizes. Such options can change image compression and other parameters needed for print.

2. Check how pages are exported and the bleed

The block of a standard book should be prepared as a single PDF file containing single pages in the correct order, not spreads.

In the export settings, include the bleed defined in the document. Do not add crop marks, registration marks or colour bars to the book block file.

Prepare the cover separately, using the template for the chosen binding. This lets you account for the spine width and fold lines, among other things.

3. Set colours and image quality

In the Output section, check the colour conversion and destination profile. For colour publications, Books Factory recommends Coated FOGRA 39; for black-and-white ones, Gray Gamma 1.8 or 2.2.

Also check the image compression and downsampling settings. The export should not reduce image resolution below the required 300 dpi at final size.

Remember that setting a high resolution during export will not improve a photo that already lacks detail in the design.

4. Make sure fonts are embedded and transparency is flattened

The PDF/X standard requires the fonts used to be embedded. In the finished PDF, you can check they are there, e.g. in Adobe Acrobat Pro, under the document properties.

If a font cannot be embedded, e.g. because of licence restrictions, InDesign will report an error when exporting to PDF/X. In that case, you need to switch to another font, e.g. a free one from the Google Fonts library.

When exporting to PDF/X-1a, you also need to apply transparency flattening. In InDesign, it is worth choosing the [High Resolution] preset, which keeps as much vector information as possible.

These are the key rules for PDF export. Once you have applied them, all that remains is to check the resulting document.

How do you check a PDF after export and spot flattening errors?

Open the finished PDF outside the program in which the design was created. Pay particular attention to elements containing transparency, as their appearance may change during flattening.

The simplest method is to compare the PDF/X-1a file with the source design. Check above all the areas with shadows, semi-transparent objects, blending modes and text overlapping images.

View the pages both in full and zoomed in. Look out for unexpected edges, colour shifts, disrupted tonal transitions or loss of sharpness in small elements.

Thin lines visible between parts of a flattened graphic may simply be a PDF display artefact, so they should not automatically be treated as a production error.

A more thorough check is possible with the Preflight tool in Adobe Acrobat Pro. It lets you check the file’s compliance with the chosen standard and detect specific technical problems. It is also worth using Output Preview with separations to assess how black is built up, whether unwanted spot colours are present and how overprint is set.

If you spot a problem, it is best to fix the source design and export again. This is safer than making ad hoc changes to the finished PDF.

At Books Factory, every file submitted is checked by our DTP team. This check helps catch technical problems before production, but it does not replace the author’s or publisher’s own review of the content, typesetting and appearance of the book.

Prepare your book file for printing at Books Factory

If you are wondering which PDF format to choose for print, at Books Factory your best bet is PDF/X-1a. It is our standard and helps limit potential problems at the production preparation stage.

Before sending your design, check its parameters, review the file after export and make sure every element looks as intended.

Planning to print a book? Prepare your files according to our guidelines and send them to Books Factory. Our DTP team will check them before they go into production, and if any technical problems are found, the necessary corrections can be made.

PDF/X-1a or PDF/X-4: frequently asked questions

Does Books Factory accept PDF/X-4 files?

Yes. We accept files prepared to the PDF/X-4 standard, but we recommend PDF/X-1a. It is a proven, predictable solution, especially for people who do not prepare print files professionally.

Does PDF/X-4 deliver better print quality than PDF/X-1a?

No. The output standard alone does not determine print quality. A properly prepared design can give an excellent result with either. The differences concern how certain elements of the document are stored and processed.

Do all fonts need to be converted to outlines?

No. If the fonts are properly embedded in the PDF, converting them to outlines is not necessary. Outlining is an alternative, but it makes later text editing harder and significantly increases file size—especially in the book block—so it is worth keeping the original document.

Is a file saved as PDF/X-1a always print-ready?

No. Compliance with PDF/X-1a does not mean that all design parameters are correct. You still need to check image resolution, bleed, margins, colour and the printer’s other technical requirements.